Insta360 Ace Pro 2 User Manual
Firmware Update
Firmware updates will be regularly available for Insta360 Ace Pro 2 to ensure it runs efficiently.
Please update to the latest version for optimal results.
Before updating the firmware, ensure Insta360 Ace Pro 2 has at least 20% battery remaining.
Update via Insta360 app:
Connect Insta360 Ace Pro 2 to the Insta360 app. The app will notify you if a new firmware update is
available. Follow the on-screen instructions to update the firmware.
If the camera firmware update fails, check the following and try the update again:
1. Ensure the camera is close to your phone.
2. Keep the Insta360 app running, and do not exit or minimize it.
3. Ensure your phone has a strong and stable network connection.
Once the above conditions are confirmed, restart the camera and try the firmware update again. If it
still fails, try to update the firmware via a computer.
Update via Computer
1. Make sure Insta360 Ace Pro 2 is powered on.
2. Connect the camera to the computer using the USB-C cable and select U-Disk Mode.
3. Download the latest firmware version from the official Insta360 website on your computer.
4. Once the computer has recognized Insta360 Ace Pro 2, copy the "Insta360AcePro2FW.bin" file to
Insta360 Ace Pro 2's root directory. Do not change the file name.
5. Disconnect Insta360 Ace Pro 2 from the computer. Insta360 Ace Pro 2 will automatically power
off. The Indicator Lights will slowly flash blue.
6. Insta360 Ace Pro 2 will automatically restart once the update is complete.
To Next Page
Loading...
