Insta360 Ace Pro 2 - Timecode; I-Log; Endurance Mode

Insta360 Ace Pro 2 User Manual
36
Timecode
The camera has a built-in timecode for a smoother workflow when filming with multiple cameras.
After recording, you can synchronize multiple video tracks in the edit.
There are three ways to synchronize the timecode:
 Timecode generator: Connect the camera to a timecode generator to synchronize the timecode.

Insta360 app: Connect the camera to the Insta360 app to automatically calibrate the camera's
system time and use it as the timecode.
 Manual synchronization: Manually set the start time on multiple cameras to align the time.
Make sure it is the same, then click "Start timecode".
I-Log
Turn on I-Log in the camera's shooting parameters page before recording. After recording, connect
the camera to the Insta360 app, go to the Album page, select the file and tap the LUT icon to adjust
the color.
Endurance Mode
When using the camera for a long period of time, turn on Endurance Mode in the camera's Shortcut
Menu for a longer battery life of up to 3 hours*. When turned on, some features, such as Gesture
and Voice Control, are unavailable.
*Tested in 77°F (25°C) lab environment, 1080p24fps video with Active HDR off in Endurance Mode.
Battery life may vary under different conditions.