Insta360 Ace Pro 2 - GPS Activity Stats

Insta360 Ace Pro 2 User Manual
37
GPS Activity Stats
Use GPS Activity Stats in the Insta360 app to overlay real-time data from your smartphone without
any third-party sports equipment.
How to connect:
1. If it's the first time using GPS Activity Stats, connect the camera to the Insta360 app to sync the
time from your smartphone.
2. Go to the app's settings page, tap "GPS Activity Stats", and authorize the Insta360 app to
access your phone's GPS data.
3. Tap the record button at the bottom of the screen to start recording your GPS data. Keep the
app on the GPS Activity Stats page, and the camera can continue recording data without being
connected to the app.
4. Swipe the button to the right to stop recording. Tap the top-right corner to view your data.
5. After recording, you can view the footage in the app's Album. Tap the footage to preview it,
select the Stats Dashboard icon and the GPS Activity Stats data will be displayed by default.
Notes:
1. You don't need to maintain a Wi-Fi connection once GPS Activity Stats is enabled. The app will
continue to record your data as long as the GPS Activity Stats interface is open on the Insta360
app, even if you switch to other apps. Recording will be interrupted if you leave the GPS Activity
Stats interface within the Insta360 app.
2. Real-time GPS location is not currently supported.
3. 360º videos are not currently supported.
4. Strong signals in the surrounding environment could interfere with the GPS data and prevent it
from being recorded. We recommend shooting in an open outdoor area.
5. GPS Activity Stats does not support the following shooting modes: Timelapse, Starlapse,
Dynamic Timelapse, Slow Motion, and Bullet Time.