Insta360 Ace Pro 2 - Stats Dashboard (Garmin;Apple;Coros;Igpsport;Fit & GPX Files)

Insta360 Ace Pro 2 User Manual
38
Stats Dashboard (Garmin/Apple/COROS/IGPSPORT/FIT & GPX Files)
You can also add real-time stats such as speed, elevation, cumulative distance, incline, and motion
trajectory to your video from third-party apps and devices when you export. You can overlay data
from your Garmin, COROS and IGPSPORT device or Apple Watch and import FIT and GPX files.
Currently, only data from Garmin, Apple, COROS, and IGPSPORT devices are supported, as well as
FIT and GPX files. More brands may be added in the future.
Notes:
1. 360º videos are not currently supported.
2. Strong signals in the surrounding environment could interfere with the GPS data and prevent it
from being recorded. We recommend shooting in an open outdoor area.
3. Stats Dashboard does not support the following shooting modes: Timelapse, Starlapse,
Dynamic Timelapse, Slow Motion, and Bullet Time.

Garmin/COROS/IGPSPORT Device
How to connect:
1. Connect the camera to the Insta360 app, open a video on the app's album page, pause the
playback, and click "Stats" in the lower menu.
2. Select your device as the data source.
3. If you have not yet registered or logged into the Insta360 app, you will need to register or log in.
4. Log in to your Garmin/COROS/IGPSPORT account and authorize the Insta360 app.
5. The data will automatically synchronize to the Insta360 app.
Notes:
• For accurate timecodes between the GPS data and the video, it is recommended to connect
the camera to the Insta360 app before recording to obtain the timecode from your phone.