Insta360 Ace Pro 2 - Page 32

Insta360 Ace Pro 2 User Manual
29
File transfer from camera to computer
(Mac/Windows)
1. Use the official USB-C cable to connect the camera to your computer.
2. Power on the camera and select 'U-Disk Mode'. Wait for the computer to recognize the camera
drive.
3. Open DCIM > Camera01 folder and copy photos/videos from this folder to your computer.
If your camera can't connect, try the following:
1. Ensure the camera's firmware is up to date.
2. Use the official USB-C cable for transfer, as non-official cables may have compatibility issues.
3. Make sure the camera is powered on.
File transfer from Insta360 app to Mac
iPhone
1. Connect your iPhone to your Mac.
2. In the Finder window on your Mac, select your iPhone.
3. At the top of the Finder window, click Files, then do one of the following:
- Transfer from Mac to iPhone: Create a new folder and name it IMPORT on your desktop. Drag
your files to the IMPORT folder and then into the Insta360 app folder on your device.
- Transfer from iPhone to Mac: Click the small triangle beside the Insta360 app to see the
DCIM folder, then drag the desired files to a folder on your Mac.
Notes:
• The folder must be named IMPORT with capital letters.
• You may not be able to see the transfer progress. Please wait for it to finish.
• After transferring, restart the Insta360 app on your phone to see the files.