Instant Pot Pro 80 User Manual (English)

Other manuals for Instant Pot Pro 80

Questions and Answers:

L
Lori LaneAug 16, 2025
Why is steam leaking from the side of my Instant Pot Kitchen Appliances lid?
- C
  Catherine Thomas DVMAug 17, 2025
  Steam leaking from the side of the Instant Pot Kitchen Appliances lid can be due to several reasons: * There is no sealing ring in the lid. Install a sealing ring. * The sealing ring is damaged or not installed properly. Replace the sealing ring. * There is food debris on the sealing ring. Remove the sealing ring and clean it thoroughly. * The lid is not closed properly. Open, then close the lid. * The sealing ring rack is warped or off-centre. Remove the sealing ring from the lid, then check the sealing ring rack for bends or warps. * The inner pot rim may be misshapen. Check for deformation.
A
Amy GilesAug 19, 2025
What to do if I have difficulty opening the Instant Pot Kitchen Appliances lid?
- E
  Elizabeth LopezAug 19, 2025
  If you're having trouble opening the lid of your Instant Pot Kitchen Appliances, it could be due to pressure inside the multicooker. Release the pressure according to the recipe and only attempt to open the lid after the float valve has dropped down. If the float valve is stuck in the popped-up position because of food debris or residue, release the pressure completely, then gently tap the float valve with a long utensil. Allow the multicooker to cool slightly so all pressure can be released. Open the lid cautiously, then thoroughly clean the float valve, surrounding area, and lid before the next use. Do not attempt to force the lid open to avoid scalding injury.
J
jimenezsamuelAug 25, 2025
Why is steam gushing from the steam release valve when the quick release switch is in the Seal position on my Instant Pot Kitchen Appliances?
- L
  Leslie MayAug 25, 2025
  If steam gushes from the steam release valve when the quick release switch is in the Seal position on your Instant Pot Kitchen Appliances, it could be due to: * Not enough liquid in the inner pot. Add thin, water-based liquid to the inner pot according to its size: 5.7L: 1 ½ cups (375 mL) 8L: 2 cups (500 mL). * The steam release valve is not seated properly. Move the steam release switch to Vent then back to the Seal position.
J
James PriceAug 27, 2025
Why is it difficult to close the lid of my Instant Pot Kitchen Appliances?
- C
  Catherine WillisAug 27, 2025
  If you're having difficulty closing the lid of your Instant Pot Kitchen Appliances, it might be because: * The sealing ring is not properly installed. Reposition the sealing ring, ensuring it is snug behind the sealing ring rack. * The float valve is in the popped-up position. Gently press the float valve downward with a long utensil. * The contents in the multicooker are still hot. Hold the quick release switch in the Vent position as you lower the lid onto the multicooker base slowly, allowing heat to dissipate.
J
Jennifer SandovalAug 30, 2025
Why is the float valve not rising in my Instant Pot Kitchen Appliances?
- M
  Mark StephensonAug 30, 2025
  The float valve on your Instant Pot Kitchen Appliances might not rise due to: * Food debris on the float valve or float valve silicone cap. Remove the float valve from the lid and clean it thoroughly. * Too little liquid in the inner pot. Check for scorching on the bottom of the inner pot. Add thin, water-based liquid to the inner pot according to its size: 5.7L: 1 ½ cups (375 mL) 8L: 2 cups (500 mL). * Float valve silicone cap damaged or missing. Install or replace the float valve and/or silicone cap. * Float valve obstructed by lid-locking mechanism. Tap the float valve with a long utensil.
D
David BaxterSep 2, 2025
Why is the display blank after connecting the power cord to my Instant Pot Kitchen Appliances?
- G
  Gregory TaylorSep 2, 2025
  If the display of your Instant Pot Kitchen Appliances remains blank after connecting the power cord, check the outlet to ensure it is powered. Inspect the power cord for damage.
T
Tiffany McbrideSep 4, 2025
Why is there minor steam leaking from the steam release valve during the cook cycle of my Instant Pot Kitchen Appliances?
- S
  Stephanie EricksonSep 5, 2025
  Minor steam leaking or hissing from the steam release valve during the cook cycle of your Instant Pot Kitchen Appliances can occur if the quick release switch is not in the Seal position. Move the quick release switch to the Seal position and add additional liquid to the inner pot. Also, it is normal when the multicooker is regulating excess pressure. Ensure there is minimum liquid in the inner pot.
J
Jose WallaceSep 7, 2025
What to do if the inner pot is stuck to the lid when the Instant Pot Kitchen Appliances is opened?
- J
  Jennifer DavidsonSep 7, 2025
  If the inner pot is stuck to the lid when you open your Instant Pot Kitchen Appliances, it may be due to the cooling of the inner pot creating suction. To release the vacuum, move the quick release switch to the Vent position.
D
Deanna JohnsonSep 10, 2025
Why is the bottom of the inner pot of my Instant Pot Kitchen Appliances wet?
- C
  Colleen JenkinsSep 10, 2025
  If the bottom of the inner pot of your Instant Pot Kitchen Appliances is wet, wipe the exterior surfaces of the inner pot and make sure the heating element is dry before inserting the inner pot into the multicooker base.
C
Crystal MartinezSep 12, 2025
Why does my Instant Pot Kitchen Appliances make occasional clicking or light cracking sounds?
- C
  christinaturnerSep 12, 2025
  The occasional clicking or light cracking sound from your Instant Pot Kitchen Appliances is normal. It is the sound of power switching and expanding pressure board when changing temperatures; no action is needed.

Instant Pot Pro 80 Specifications

General

Model	Pro 80
Capacity	8 quarts
Power	1200 watts
Voltage	120V
Material	Stainless steel (inner pot)
Safety Features	Overheat protection
Settings	Keep Warm
Pressure Levels	3 (High, Low, and Steam)