Instant Pot Pro 80 User Manual (English)

Other manuals for Instant Pot Pro 80

Questions and Answers:

L
Lori LaneAug 16, 2025
Why is steam leaking from the side of my Instant Pot Kitchen Appliances lid?
- C
  Catherine Thomas DVMAug 17, 2025
  Steam leaking from the side of the Instant Pot Kitchen Appliances lid can be due to several reasons: * There is no sealing ring in the lid. Install a sealing ring. * The sealing ring is damaged or not installed properly. Replace the sealing ring. * There is food debris on the sealing ring. Remove the sealing ring and clean it thoroughly. * The lid is not closed properly. Open, then close the lid. * The sealing ring rack is warped or off-centre. Remove the sealing ring from the lid, then check the sealing ring rack for bends or warps. * The inner pot rim may be misshapen. Check for deformation.
A
Amy GilesAug 19, 2025
What to do if I have difficulty opening the Instant Pot Kitchen Appliances lid?
- E
  Elizabeth LopezAug 19, 2025
  If you're having trouble opening the lid of your Instant Pot Kitchen Appliances, it could be due to pressure inside the multicooker. Release the pressure according to the recipe and only attempt to open the lid after the float valve has dropped down. If the float valve is stuck in the popped-up position because of food debris or residue, release the pressure completely, then gently tap the float valve with a long utensil. Allow the multicooker to cool slightly so all pressure can be released. Open the lid cautiously, then thoroughly clean the float valve, surrounding area, and lid before the next use. Do not attempt to force the lid open to avoid scalding injury.
J
jimenezsamuelAug 25, 2025
Why is steam gushing from the steam release valve when the quick release switch is in the Seal position on my Instant Pot Kitchen Appliances?
- L
  Leslie MayAug 25, 2025
  If steam gushes from the steam release valve when the quick release switch is in the Seal position on your Instant Pot Kitchen Appliances, it could be due to: * Not enough liquid in the inner pot. Add thin, water-based liquid to the inner pot according to its size: 5.7L: 1 ½ cups (375 mL) 8L: 2 cups (500 mL). * The steam release valve is not seated properly. Move the steam release switch to Vent then back to the Seal position.
J
James PriceAug 27, 2025
Why is it difficult to close the lid of my Instant Pot Kitchen Appliances?
- C
  Catherine WillisAug 27, 2025
  If you're having difficulty closing the lid of your Instant Pot Kitchen Appliances, it might be because: * The sealing ring is not properly installed. Reposition the sealing ring, ensuring it is snug behind the sealing ring rack. * The float valve is in the popped-up position. Gently press the float valve downward with a long utensil. * The contents in the multicooker are still hot. Hold the quick release switch in the Vent position as you lower the lid onto the multicooker base slowly, allowing heat to dissipate.
J
Jennifer SandovalAug 30, 2025
Why is the float valve not rising in my Instant Pot Kitchen Appliances?
- M
  Mark StephensonAug 30, 2025
  The float valve on your Instant Pot Kitchen Appliances might not rise due to: * Food debris on the float valve or float valve silicone cap. Remove the float valve from the lid and clean it thoroughly. * Too little liquid in the inner pot. Check for scorching on the bottom of the inner pot. Add thin, water-based liquid to the inner pot according to its size: 5.7L: 1 ½ cups (375 mL) 8L: 2 cups (500 mL). * Float valve silicone cap damaged or missing. Install or replace the float valve and/or silicone cap. * Float valve obstructed by lid-locking mechanism. Tap the float valve with a long utensil.
D
David BaxterSep 2, 2025
Why is the display blank after connecting the power cord to my Instant Pot Kitchen Appliances?
- G
  Gregory TaylorSep 2, 2025
  If the display of your Instant Pot Kitchen Appliances remains blank after connecting the power cord, check the outlet to ensure it is powered. Inspect the power cord for damage.
T
Tiffany McbrideSep 4, 2025
Why is there minor steam leaking from the steam release valve during the cook cycle of my Instant Pot Kitchen Appliances?
- S
  Stephanie EricksonSep 5, 2025
  Minor steam leaking or hissing from the steam release valve during the cook cycle of your Instant Pot Kitchen Appliances can occur if the quick release switch is not in the Seal position. Move the quick release switch to the Seal position and add additional liquid to the inner pot. Also, it is normal when the multicooker is regulating excess pressure. Ensure there is minimum liquid in the inner pot.
J
Jose WallaceSep 7, 2025
What to do if the inner pot is stuck to the lid when the Instant Pot Kitchen Appliances is opened?
- J
  Jennifer DavidsonSep 7, 2025
  If the inner pot is stuck to the lid when you open your Instant Pot Kitchen Appliances, it may be due to the cooling of the inner pot creating suction. To release the vacuum, move the quick release switch to the Vent position.
D
Deanna JohnsonSep 10, 2025
Why is the bottom of the inner pot of my Instant Pot Kitchen Appliances wet?
- C
  Colleen JenkinsSep 10, 2025
  If the bottom of the inner pot of your Instant Pot Kitchen Appliances is wet, wipe the exterior surfaces of the inner pot and make sure the heating element is dry before inserting the inner pot into the multicooker base.
C
Crystal MartinezSep 12, 2025
Why does my Instant Pot Kitchen Appliances make occasional clicking or light cracking sounds?
- C
  christinaturnerSep 12, 2025
  The occasional clicking or light cracking sound from your Instant Pot Kitchen Appliances is normal. It is the sound of power switching and expanding pressure board when changing temperatures; no action is needed.

Instant Pot Pro 80 Specifications

General

Model	Pro 80
Capacity	8 quarts
Power	1200 watts
Voltage	120V
Material	Stainless steel (inner pot)
Safety Features	Overheat protection
Settings	Keep Warm
Pressure Levels	3 (High, Low, and Steam)

Summary

Important Safeguards

Special Cord Set Instructions

Safety instructions for the appliance's power cord to prevent hazards.

Product Specifications

Technical details and measurements for different Instant Pot Pro models.

Product, Parts and Accessories

Top of Multicooker Lid

Diagrams and descriptions of the multicooker lid's upper components.

Bottom of Multicooker Lid

Diagrams and descriptions of the multicooker lid's lower components.

Inner Pot

Information and diagram of the removable inner cooking pot.

Multicooker Base

Information and diagram of the main body of the multicooker.

Accessories

Lists and shows included accessories like steam rack and extra sealing ring.

Get Started

Initial Set Up

Step-by-step guide for unpacking and setting up the multicooker for the first time.

Initial Test Run (Water Test)

Instructions for performing a preliminary water test to ensure proper function.

Pressure Cooking 101

Behind the Magic Curtain

Explanation of the three stages of pressure cooking: Pre-heating, Cooking, and Depressurisation.

Releasing Pressure

Venting Methods

Outlines the different methods for releasing pressure from the multicooker.

Natural Release (NR or NPR)

Explains the process and expectations of natural pressure release.

Quick Release (QR or QPR)

Explains the process and expectations of quick pressure release.

Timed Natural Release

Details the timed natural release method for pressure cooking.

Control Panel

Smart Programmes

Overview of the different pre-set cooking programmes available on the control panel.

Preset Cooking Options

Explains how to select and customize preset cooking options.

Pressure

Describes the pressure level settings: None, Low, and High.

Temperature

Describes the temperature settings: Low, High, and Custom.

Time Display

Explains how the time is displayed for different cooking stages and modes.

Vent Reminder

Explains the function of the vent reminder setting for pressure cooking.

Sounds

Details the audible sound notifications and alerts for the multicooker.

Cooking Progress Bar

Explains the visual indicator for cooking stages: Pre-heating, Cooking, and Keep Warm.

Fav 1 to 5

Describes the function of favourite program buttons for quick recipe access.

Control Dial

Explains how to use the dial for navigation and selection on the control panel.

Delay Start

How to schedule a delayed start for cooking programmes.

Keep Warm

How to activate or deactivate the Keep Warm function.

Cancel

How to stop a cooking programme and return to standby.

Start

How to begin a selected cooking programme.

Status Messages

OFF

Indicates the multicooker is in standby mode, ready for use.

On

Indicates the multicooker is in the pre-heating stage.

Hot

Signals that the inner pot has reached the correct cooking temperature.

00:15

Displays remaining cooking time, delay start, or keep warm duration.

boil

Indicates the Yogurt programme is in pasteurisation mode.

149°F

Shows the default temperature setting for Sous Vide cooking.

SET2

Indicates saving a favourite recipe.

36bd

Indicates a favourite key hasn't been saved.

End

Signals that the cooking programme has finished.

Settings

Change Displayed Temperature (°C and °F)

How to switch between Celsius and Fahrenheit for temperature display.

Turn Sound On or Off

How to enable or disable the audible sound notifications.

Adjust and Save Custom Cooking Times and Temperatures

How to modify and save custom cooking parameters.

On-the-Fly Changes to Cooking Settings

How to adjust settings during an active cooking programme.

Delay the Start of Cooking

How to schedule a delayed start for cooking programmes.

Reset an Individual Smart Programme

How to revert a specific Smart Programme to its factory default settings.

Reset All Smart Programmes

How to restore all Smart Programmes to their factory default settings.

Pressure Control Features

Multicooker Lid

Information on the lid's features, sealing mechanism, and how to remove/close it.

Removing the Lid

Step-by-step instructions for safely removing the multicooker lid.

Closing the Lid

Step-by-step instructions for properly closing the multicooker lid.

QuickCool™

Describes the QuickCool feature for faster natural release of pressure.

Quick Release Switch

Explains the function and operation of the switch that controls steam release.

Steam Release Assembly

Details on the steam release components and their proper installation.

Anti-Block Shield

Explains the purpose and installation of the shield preventing food blockages.

Sealing Ring

Information on the sealing ring's function, installation, and maintenance.

Float Valve

Explains the float valve's role in indicating pressure and its appearance.

Cooking

Smart Programme Overview

A table summarizing Smart Programmes, presets, pressure levels, and tips.

Pressure Cook and Rice

Guide to using pressure cooking for rice and other foods.

Steam (Non-Pressurised)

Instructions for using the Steam programme for cooking and sanitisation.

Sauté

Instructions for using the Sauté function for searing and simmering.

Deglazing

How to deglaze the pot after sautéing to create sauces.

Slow Cook

Instructions for using the Slow Cook programme.

Sous Vide

Guide to the Sous Vide cooking method.

Reverse Searing

Technique for searing meat after sous vide cooking.

Ingredients and Seasonings

Tips on using ingredients and seasonings for sous vide cooking.

Sous Vide Cooking Chart

A chart detailing cooking times and temperatures for various foods in sous vide.

Yogurt

Instructions for making yogurt using the multicooker.

Using Yogurt Cups

How to use yogurt cups with the multicooker.

Bake

Instructions for using the Bake function for dough and desserts.

Keep Warm

How to use the Keep Warm function for meals.

Using Favourite Programmes

Saving Recipes as Favourites

How to save custom settings as favourite programmes for quick access.

Using Favourite Recipes

How to select and start a saved favourite recipe.

Care, Cleaning and Storage

Removing and Installing Parts

Instructions for removing and installing the sealing ring.

Steam Release Assembly

Instructions for removing and installing the steam release components.

Anti-Block Shield

Instructions for removing and installing the anti-block shield.

QuickCool Protective Cover

Instructions for removing and installing the QuickCool cover.

Float Valve and Silicone Cap

Instructions for removing and installing the float valve and its cap.

Condensation Collector

Instructions for removing and installing the condensation collector.

Troubleshooting

Occasional Clicking or Light Cracking Sound

Addresses normal operational sounds of the multicooker.

Difficulty Closing the Lid

Troubleshooting steps for issues with closing the multicooker lid.

Difficulty Opening the Lid

Troubleshooting steps for issues with opening the multicooker lid.

The Inner Pot is Stuck to the Lid

Solutions for the inner pot adhering to the lid after cooking.

Steam Leaks from Side of Lid

Troubleshooting steps for steam leaks from the lid's sides.

The Float Valve Does Not Rise

Troubleshooting steps if the float valve fails to pop up.

Minor Steam Leaking or Hissing from the Steam Release Valve

Explains normal hissing and minor leaks during cooking.

The Display Remains Blank

Troubleshooting steps for a blank display after connecting power.

Steam Gushes from the Steam Release Valve

Addresses excessive steam release from the valve during cooking.

Error Code Appears on the Display

Explains common error codes and their solutions.

Warranty

Limited Warranty

Details the terms and duration of the product's limited warranty.

Limitation and Exclusions

Outlines what is not covered by the limited warranty and exclusions.

Related product manuals

Instant Pot Duo 80 v5

15 pages

Instant Pot DUO PLUS 80 V3

46 pages

Duo Crisp + Air Fryer AF 8

64 pages

Instant Pot IP-DUO60 V3/80

2 pages

Instant Pot Duo

54 pages

Instant Pot DUO CRISP

48 pages

Instant Pot Smart WiFi

20 pages

Instant Pot Lux Series

30 pages

Instant Pot DUO EVO PLUS

61 pages

Instant Pot Duo Plus Series

55 pages

Instant Pot Pro 80 User Manual

Table of Contents

Other manuals for Instant Pot Pro 80

Questions and Answers:

Instant Pot Pro 80 Specifications

Summary

Important Safeguards

Special Cord Set Instructions

Product Specifications

Product, Parts and Accessories

Top of Multicooker Lid

Bottom of Multicooker Lid

Inner Pot

Multicooker Base

Accessories

Get Started

Initial Set Up

Initial Test Run (Water Test)

Pressure Cooking 101

Behind the Magic Curtain

Releasing Pressure

Venting Methods

Natural Release (NR or NPR)

Quick Release (QR or QPR)

Timed Natural Release

Control Panel

Smart Programmes

Preset Cooking Options

Pressure

Temperature

Time Display

Vent Reminder

Sounds

Cooking Progress Bar

Fav 1 to 5

Control Dial

Delay Start

Keep Warm

Cancel

Start

Status Messages

OFF

On

Hot

00:15

boil

149°F

SET2

36bd

End

Settings

Change Displayed Temperature (°C and °F)

Turn Sound On or Off

Adjust and Save Custom Cooking Times and Temperatures

On-the-Fly Changes to Cooking Settings

Delay the Start of Cooking

Reset an Individual Smart Programme

Reset All Smart Programmes

Pressure Control Features

Multicooker Lid

Removing the Lid

Closing the Lid

QuickCool™

Quick Release Switch

Steam Release Assembly

Anti-Block Shield

Sealing Ring

Float Valve

Cooking

Smart Programme Overview

Pressure Cook and Rice

Steam (Non-Pressurised)

Sauté

Deglazing

Slow Cook

Sous Vide

Reverse Searing

Ingredients and Seasonings

Sous Vide Cooking Chart

Yogurt