Instant Pot Pro 80 User Manual

instantpot.com.au | 55
TROUBLESHOOTING
Problem Possible reason Try this
Steam gushes
from the steam
release valve when
the quick release
switch is in the
Seal position.
Not enough liquid in the inner pot.
Add thin, water-based liquid to the inner pot
according to its size.
5.7L: 1 ½ cups (375 mL)
8L: 2 cups (500 mL)
Pressure sensor control failure. Contact Customer Care.
Steam release valve is not seated
properly.
Move the steam release switch to Vent then
back to the Seal position.
Error code
appears on the
display and the
multicooker beeps
continuously.
C1
C3
C4
C6
Faulty sensor. Contact Customer Care.
C7
Heat element has failed. Contact Customer Care.
Not enough liquid.
Multicooker lid is not
used for pressure cooking
functions.
Add thin, water-based liquid to the inner pot
according to its size.
5.7L: 1 ½ cups (375 mL)
8L: 2 cups (500 mL)
Put on the lid and restart.
C8 Incorrect inner pot is used.
Only use a stainless-steel Pro Series inner pot
with Easy Grip handles with the Pro.
Lid
The lid is not in the correct
position for the selected
programme.
Open and close the lid.
Do not use a lid when using Sauté.
Food
burn
High temperature detected
at bottom of inner pot; the
multicooker automatically
reduces the temperature
to avoid overheating.
Starch deposits at the bottom of the inner pot
may have blocked heat dissipation.
Turn the multicooker off, release pressure and
inspect the bottom of the inner pot.
PrSE
Pressure has accumulated
during a non-pressure
cooking programme.
Touch Cancel and Quick Release pressure.
Any other servicing must be performed by an authorised representative.

Instant Pot Pro 80 Specifications

General

Brand	Instant Pot
Model	Pro 80
Category	Electric Pressure Cooker
Language	English