Instant Pot Pro 80 User Manual

12 | support@instantpot.com.au | 1800 251 643
GET STARTED
INITIAL TEST RUN WATER TEST
Do you have to do the water test? No — but getting to know the ins and outs of your new
Pro prepares you for success in the kitchen! Take a few minutes to get to know how this
tireless kitchen hero works.
Stage 1: Setting up the Pro for pressure
cooking
01 Remove the inner pot from the
multicooker base and fi ll it to the fi rst
line (1) with water.
02 Insert the inner pot into the
multicooker base.
03 Connect the power cord to a 220-
240V power source.
The display shows OFF.
04 Place and close the lid as described
in Pressure control features:
Multicooker lid.
The lid automatically seals for
pressure cooking.
Stage 2: “Cooking” (…but not really,
this is just a test!)
01 Touch Pressure Cook.
02 When Custom fl ashes, press the dial
to select it and go to the next fi eld.
03 When the pressure level fl ashes, press
the dial to select High pressure and go
to the next fi eld.
04 When the time fl ashes, turn the dial
to adjust the cook time to 5 minutes
(00:05).
Press the dial to confi rm the change
and go to the next fi eld.
Customisations are saved to the
Smart Programme when cooking
begins.
05 When Reminder fl ashes, turn the
dial to toggle between vent reminder
options. Select Off and press the dial
to confi rm. See Control panel for
more information.
06 Select Off and press the dial to
confi rm.
07 Touch Start to begin.
The display shows On and the cooking
progress bar shows Pre-heating.
Keep Warm turns on automatically
after some Smart Programmes fi nish.
Touch Keep Warm to turn the setting
off for this test.
Stage 3: Releasing pressure
01 When Cooking fi nishes, the display
shows End.
02 If you have set a 5 or 10 minute vent
reminder, the reminder timer begins
to count down.
03 Follow instructions for a Quick Release
in Releasing pressure: Venting
methods.
04 Wait for the fl oat valve to drop, then
carefully open and remove the lid
as described in Pressure control
features: Multicooker lid.
05 Using proper hand protection, remove
the inner pot from the multicooker
base, discard the water and
thoroughly dry the inner pot.
That’s it! You’re good to go :)
Instant tip: While the multicooker does
its thing, read Pressure cooking 101 to
find out how the magic happens.

Instant Pot Pro 80 Specifications

General

Brand	Instant Pot
Model	Pro 80
Category	Electric Pressure Cooker
Language	English