Instant Pot Pro 80 User Manual

52 | support@instantpot.com.au | 1800 251 643
CARE, CLEANING AND STORAGE
Float valve and silicone cap
Remove the float valve from the lid
Place one fi nger on the fl at top of fl oat
valve, then turn the lid over. Detach the
silicone cap from the bottom side of the
fl oat valve, and remove the fl oat valve
from the top of the lid.
Do not discard the fl oat valve or
silicone cap!
Top
Bottom
Install the float valve
Drop the narrow end of the fl oat valve into
the fl oat valve hole on the top of the lid.
Place one fi nger on the fl at top of the fl oat
valve, then turn the lid over. Firmly attach
the silicone cap to the bottom of the fl oat
valve.
Condensation collector
The condensation collector sits at the back
of the multicooker base and catches any
overfl ow from the condensation rim.
Remove the condensation collector
Pull the condensation collector away from
the multicooker base; do not pull down.
Note the tabs on the multicooker base and
the grooves on the condensation collector.
Install the condensation collector
Align the grooves on the condensation
collector over the tabs on the back
of the multicooker base and slide the
condensation collector into place like
closing a drawer.
QuickCool protective cover
Remove the protective cover
Grip the tab and push it towards the lid
handle, then pull it up, towards you,
and off.
Install the protective cover
Grip the tab and slide the cover towards
the back of the metal portion of the lid,
then press down until it clicks.

Instant Pot Pro 80 Specifications

General

Brand	Instant Pot
Model	Pro 80
Category	Electric Pressure Cooker
Language	English