INSTEON 2457D2 - Default Chapter; Table of Contents

Contents
Getting Started
INSTEON Dimmer Module 4
Device Overview
Buttons
Installation
Leave Your Lamp On
INSTEON Links
Understanding Linking 6
Links are One-Way
Links Remember a Device’s State
Controllers
Responders
Controller-Only 7
Responder-Only
Grouping Devices
Use Cross Linking
INSTEON Hub
Linking to the INSTEON Hub 9
Manual Linking
Linking with a Single-Button Controller 11
Linking with a Multi-Button Controller 12
Multi-Linking or Making a Scene 13
Unlinking from a Single-Button Controller 14
Unlinking from a Multi-Button Controller 15
Multi-Unlinking or Removing a Scene 16
Local Programming
About Local Programming 18
Local Programming Flow Chart 19
Software-Only Features
Beep on Button Press 21
Disable Local Programming
Blink on Trac
Error Blink
X10 Support
Setting the X10 Address 23
Removing the X10 Address 24
Appendix
Specications 27
Troubleshooting 30
Certications and Warnings 32
Product Warranty 33