Need help?Do you have a question about the INSTEON wall switch and is the answer not in the manual?
General| Type | Dimmer |
|---|---|
| Load Type | Incandescent, LED, CFL |
| Communication Protocol | INSTEON |
| Operating Frequency | 915 MHz |
| Model Number | 2477D |
| Voltage | 120V |
| Color | White |
| Range | 150 feet (open air) |
| Warranty | 2 years |
Details the different Insteon Wall Switch models, including Dimmer and High-Wattage versions.
Lists necessary tools and the crucial step of disconnecting power before installation.
Covers safely disconnecting/reconnecting power and identifying line/load wires.
Provides instructions for connecting wires and physically installing the switch into the junction box.
Guides on testing the installed switch and attaching the wall plate.
Illustrates the wiring for a single-pole installation of the Insteon Wall Switch.
Shows the wiring configuration for a three-way setup with the Insteon Wall Switch.
Details the wiring for a four-way installation using the Insteon Wall Switch.
Defines one-way links, device states, controllers, and responders in Insteon networks.
Differentiates device roles and explains cross-linking for bidirectional control.
Step-by-step guide to add the Wall Switch to the Insteon Hub via software.
Instructions for linking the Wall Switch to control a single Insteon device.
Guides on linking the Wall Switch to control specific buttons on multi-button Insteon devices.
How to link multiple devices to create and control scenes.
Steps to remove a link from a single-button Insteon device.
Procedures for unlinking from specific buttons on multi-button devices.
How to unlink multiple devices or remove an entire scene association.
Defines Linking, Multi-Linking, Unlinking, and Multi-Unlinking modes.
Visualizes the sequence of operations for LED brightness, ramp rates, and factory reset.
Step-by-step guide on how to perform a factory reset on the Insteon Wall Switch.
Customizing button beep, LED traffic blink, local programming, and error blink.
How to adjust the brightness of the status LEDs on the Wall Switch.
Definitions of key terms and concepts related to Insteon technology.
Covers scene memberships, mechanical aspects, dimensions, and operating environment.
Details electrical requirements, wire specifications, weight, and certifications.
Addresses issues like unexpected activation, response failures, and wiring errors indicated by beeps.
To Next Page
