19
Multi-Linking or Making a Scene
2
3 4
Adjust the devices in your scene
to their desired state: on, o, or
brightness level if dimming.
Lamp 1
Lamp 3
Lamp 2
Appliance
One at a time, press and hold the
set button on each device in the
scene until it double-beeps.
Tap the set button on your Wall
Switch to nish building your scene.
1
On your Insteon Wall Switch, press
and hold the set button until the
device beeps, then tap the set
button.
50% 72%
30%
ON
®
A
B
Your Wall Switch will now
control your scene.
To Next Page
Loading...
