INSTEON 2457D2 - Beep on Button Press; Disable Local Programming; Blink on Traffic; Error Blink

21
Software-Only Features
Beep on Button Press Disable Local Programming
Blink on Trac Error Blink
The Dimmer Module will beep every time one
of its buttons are tapped. By default, this
feature is disabled.
Prevents changing any settings using the
set button or tap-and-hold programming. By
default, this feature is disabled.
The Dimmer Module LED will blink if it detects
INSTEON communication. By default, this
feature is disabled.
The Dimmer Module LED will blink red once if
one or more responders do not acknowledge
a message and will blink green once if all
responders successfully acknowledge a
message. By default, this feature is enabled.
®
®® ®
®
X
X