Integra 90520 - Troubleshooting; Headlight Not Switching On; Decreased or Fuzzy Spot Brightness; Short Battery Life

14
Troubleshooting
Trouble Area Possible Cause Corrective Action
Headlight will not switch on Power cord connections may not be
effective
Detach and firmly seat to assure complete
connection
Brightness of spot decreases during use Temperature of LED may have
increased due to blockage of airflow
Turn off the headlight, check and remove
any obstructions from the headlight
module and controller fan vents.
a
Brightness of spot is diminished and / or
the spot appears fuzzy
Lens may be contaminated Clean lens with 70% Isopropyl Alcohol
Fully charged baery operates headlight
for less than 2 hours
Baery may be losing charge capacity Replace baery
Cooling fan is making a whirring or
clicking sound
Fan may have been damaged aer
dropping headlight
Return to Integra for service
a
The operating temperature of the LED is continuously monitored and the fan speed is adjusted to maintain proper LED
operating temperatures. In the event of a malfunction in the cooling system or blockage of airflow, the power in the LED will be
reduced to the low seing. If the temperature of the LED continues to rise, the intensity of the headlight will default to a seing
less than the low seing of the headlight. This serves to communicate the overheating condition while maintaining some level
of illumination until an alternate light source can be employed.