Integra DTM-5.3 Service Manual

DTM-5.3
SPECIFICATIONS
AMPLIFIER SECTION
Power Output: 100 Watts per channel, min RMS, at 8 ohms,
both channels driven from 20 Hz to 20 kHz,
with no more than 0.08% THD.
Dynamic power output: 2
× 170 Watts at 2 ohms
2 × 135 Watts at 4 ohms
2 × 140 Watts at 8 ohms
Total Harmonic Distortion: 0.08% at rated power
0.08% at 1 watt output
IM Distortion: 0.08% at rated power
0.08% at 1 watt output
Damping Factor: 60 at 8 ohms
Input Sensitivity and Impedance
PHONO: 2.5 mV, 50 kohms
Line (CD, TAPE-1, 2,
VIDEO, DVD): 150 mV, 50 kohms
Video (VIDEO, DVD) 1 Vp-p, 75 ohms
Output Level and Impedance
Line (TAPE-1, 2,
VIDEO): 150 mV, 2.2 kohms
Video (VIDEO,
MONITOR): 1 Vp-p, 75 ohms
Zone 2: 150 mV, 22 kohms
Phono Overload: 120 mV RMS. at 1 kHz, 0.5% T.H.D.
Frequency Response: 20 Hz to 30 kHz : ±1 dB
RIAA Deviation: 20 Hz to 20 kHz : ±0.8 dB
Tone Control
Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10,000 Hz
Signal-to-Noise Ratio
Phono: 80 dB (IHF A, 5 mV input)
CD/Tape: 100 dB (IHF A)
Muting: -50dB
TUNER SECTION
FM
Tuning Range: 87.5 to 108.0 MHz (100 kHz steps)
Usable Sensitivity
Mono: 11.2 dBf, 1.0 µV (75 ohms IHF)
0.9 µV (75 ohms DIN)
Stereo: 17.2 dBf, 2.0 µV (75 ohms IHF)
23 µV (75 ohms DIN)
50 dB Quieting Sensitivity
Mono: 17.2 dBf, 2.0 µV (75 ohms)
Stereo: 37.2 dBf, 20 µV (75 ohms)
Capture Ratio: 2.0 dB
Image Rejection Ratio: 40 dB
IF Rejection Ratio: 90 dB
Signal-to-Noise Ratio
Mono: 76 dB, IHF
Stereo: 70 dB, IHF
Alternate Channel Att. (±400 kHz)
Mono: 55 dB, IHF
Selectivity: 55 dB DIN (±300 kHz 40 kHz Devi.)
AM Suppression Ratio: 50 dB
Total Harmonic Distortion
Mono: 0.15%
Stereo: 0.25%
Frequency Response: 30 Hz to 15 kHz, ±1.5 dB
Stereo Separation: 45 dB at 1 kHz
30 dB at 100 Hz to 10 kHz
Stereo Threshold: 17.2 dBf, 2.0 µV (75 ohms)
AM
Tuning Range: 530 to 1,710 kHz (10 kHz steps)
Usable Sensitivity: 30 µV
Image Rejection Ratio: 40 dB
IF Rejection Ratio: 40 dB
Signal-to-Noise Ratio: 40 dB
Total Harmonic Distortion: 0.7%
GENERAL
Power Supply: AC 120 V, 60 Hz
Power Consumption: 2.8 A
Dimensions (W
× H × D): 17-1/8" × 5-7/8" × 13-7/16"
435 × 150 × 341 mm
Weight: 19.8 lbs. (9.0 kg)
REMOTE CONTROLLER (RC-477S)
Transmitter: Infrared
Signal range: Approx. 16 ft., 5 meters
Power supply: Two "AA" batteries (1.5 V
× 2)
Specifications and features are subject to change without notice.

Integra DTM-5.3 Specifications

Amplifier Section

power output	100 Watts per channel
dynamic power output at 2 ohms	2 × 170 Watts
dynamic power output at 4 ohms	2 × 135 Watts
dynamic power output at 8 ohms	2 × 140 Watts
total harmonic distortion at rated power	0.08%
IM distortion at rated power	0.08%
damping factor	60 at 8 ohms
phono input sensitivity and impedance	2.5 mV, 50 kohms
line input sensitivity and impedance	150 mV, 50 kohms
video input sensitivity and impedance	1 Vp-p, 75 ohms
phono overload	120 mV RMS at 1 kHz

Tuner Section FM

tuning range	87.5 to 108.0 MHz
usable sensitivity mono	11.2 dBf, 1.0 µV
usable sensitivity stereo	17.2 dBf, 2.0 µV
signal-to-noise ratio mono	76 dB
signal-to-noise ratio stereo	70 dB
total harmonic distortion mono	0.15%
total harmonic distortion stereo	0.25%

Tuner Section AM

tuning range	530 to 1, 710 kHz
usable sensitivity	30 µV
image rejection ratio	40 dB
signal-to-noise ratio	40 dB
total harmonic distortion	0.7%

General

power supply	AC 120 V, 60 Hz
power consumption	2.8 A
dimensions	17-1/8" × 5-7/8" × 13-7/16"
weight	19.8 lbs.