Integra DTR-10.5 Service Manual

DTR-10.5
SPECIFICATIONS
General
Amplifier Section
Power Supply Rating
USA and Canadian models: AC 120 V, 60 Hz
Australian models: AC 230-240 V, 50 Hz
Consumption Power
USA & Canadian models: 13.8 A
Australian models: 1,200 W
Standby Power Consumption: 3.9 W
Dimensions (W H D): 435 220 480.5 mm
(17-1/8" 8-11/16" 18-15/16")
Weight: 33 kg (72.8 lbs)
Inputs:
Audio
Multichannel (7.1ch) Inputs: 2
Phono (MM): 1
Line inputs: 9 (assignable), 1 (Fixed) (Video 7
on the front panel)
Digital inputs Coaxial: 6
Digital inputs Optical: 6 (assignable), 1 (Fixed) (Video 7
on the front panel)
Video
Composite Video inputs: 6 (assignable),
1 (fixed, on the front panel)
S Video inputs: 6 (assignable),
1 (fixed, on the front panel)
Component Video RCA
inputs: 3
Component Video BNC
input: 1 (Australian models)
Audio and Video
HDMI inputs (19-pin):
(option)
2
Miscellaneous 3-IR in (Phoenix connector) for
Main, Zone 2 and Zone 3
Outputs:
Audio
Speakers A: Front L/R, Center, Surround L/R,
Surround Back L/R
Speakers B: Front L/R, Center, Surround L/R,
Surround Back L/R or Powered
Zone 2 L/R
Pre out A: Front L/R, Center, Surround L/R,
Surround Back L/R, Subwoofer
Pre out B: Subwoofer
Headphones: 1
Line outputs: 5 (assignable to Recout, Zone 2 out
and Zone 3 out)
Digital outputs Coaxial: 2 (assignable to Recout, Zone 2 out
and Zone 3 out)
Digital outputs Optical: 2 (assignable to Recout, Zone 2 out
and Zone 3 out)
Video
Composite Video outputs: 3 (assignable to Monitor out A/B,
Recout, Zone 2 out and Zone 3 out)
1 (fixed, Monitor out A)
S Video outputs: 3 (assignable to Monitor out A/B
and Recout)
1 (fixed, Monitor out A)
Component Video RCA
outputs: 1
Component Video BNC
output: 1 (Australian models)
Audio and Video
HDMI output (19-pin):
(option)
1
Miscellaneous
12V Trigger out (1/8-inch
mini-jack): 5 (for A, B, C, D, E)
Inputs/Outputs:
Miscellaneous
i. LINK(A
Ethernet (Net-Tune):
UDIO) (4 pin): 2
(option) 1
(1/8-inch mini-jack):
1
RS232 (9 pin D-SUB
Female connector): 1
Antennas:
FM: 75 ohms unbalanced
AM: Included loop antenna and external
terminal
AC Inlet: 1 (IEC type)
AC Outlets:
USA & Canadian models: 1 (Switched, 120 W 1A max.)
Australian models: 1 (Switched, 100 W max.)
Power Output (All channels):
USA & Canada (FTC):
150 Watts per channel min. RMS
into 8 ohms 2 channel driven,
from 20 to 20,000 Hz with no
more than 0.05% total harmonic
distortion.
200 Watts per channel min. RMS
into 6 ohms 2 channel driven, 1,000
Hz with no more than 0.1% total
harmonic distortion.
260 Watts per channel min. RMS
into 8 ohms 2 channel driven,
1,000 Hz with no more than 0.1%
total harmonic distortion. [BTL]
Australian model (DIN): 200 Watts per channel min. RMS
into 6 ohms 2 channel driven, 1,000
Hz DIN
280 Watts per channel min. RMS
into 8 ohms 2 channel driven, 1,000
Hz DIN [BTL]
Dynamic Power:
2 340 W (3
ven)
2 260 W (4 , 2 channel driven)
2 175 W (8
, 2 channel dri
ven)
THD (Total Harmonic Distor-
tion): 0.05% (rated power)
0.05% (1 watt output)
Damping Factor: 60 at 8 ohms
IM Distortion: 0.05% (rated power)
0.05% (1 watt output)
Input Sensitivity and Impedance:
Audio 200 mV, 50 k (AUDIO IN 1-9/
FRONT)
2.5 mV, 50 k (PHONO MM)
200 mV, 50 k (MULTI IN FR/FL/
C/SR/SL/SBR/SBL)
36 mV, 50 k (MULTI IN SUB)
0.5 Vp-p, 75 (DIGITAL IN
COAXIAL 1-6)
Video (DVD, VIDEO 1-5) 1 Vp-p, 75 (Composite Video)
1 Vp-p, 75 (S Video, Y signal)
0.28 Vp-p, 75 (S Video, C signal)
Component 1 Vp-p, 75 (Y)
0.7 Vp-p, 75 (P
B/CB, PR/CR)
, 2 channel dri
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

Integra DTR-10.5 Specifications

Amplifier Specifications

amplifier power output at 6 ohms	200 W per channel
amplifier power output at 8 ohms	150 W per channel
dynamic power output at 3 ohms	2 x 340 W
dynamic power output at 4 ohms	2 x 260 W
dynamic power output at 8 ohms	2 x 175 W
frequency response	5 Hz to 100 kHz
signal-to-noise ratio	110 dB
total harmonic distortion	0.08%
damping factor	60 at 8 ohms

Input and Output Specifications

line input sensitivity and impedance	200 mV, 50 k ohms
multi-channel input sensitivity and impedance	200 mV, 50 k ohms
subwoofer input sensitivity and impedance	36 mV, 50 k ohms
rec out level and impedance	200 mV, 470 ohms
pre out level and impedance	1 V, 470 ohms
zone 2/3 line output level and impedance	100 mV, 470 ohms

Radio Specifications

AM tuning range	530–1, 710 kHz
AM usable sensitivity	30 µV
FM tuning range	87.5–108.0 MHz
FM usable sensitivity, stereo	17.2 dBf, 2.0 µV (75 ohms IHF)

Phono and Tone Control

phono input sensitivity	2.5 mV, 50 k ohms
phono overload	70 mV RMS at 1 kHz, 0.5% THD
RIAA deviation	20 Hz to 20 kHz: ±0.8 dB
phono signal-to-noise ratio	80 dB
bass control	±12 dB at 50 Hz
mid range control	±12 dB at 1, 000 Hz
treble control	±12 dB at 20, 000 Hz

General Specifications

power supply	AC 120 V, 60 Hz
power consumption	13.0 A
dimensions	435 x 175 x 429 mm
weight	32.1 kg