Integra DTR-10.5 Brochure & Specs

Customization
The D
TR-1
0.5 is the world’s first home theater receiver built
around a modular, card-based architecture. Integra will
work with your professional installer or retailer to configure
the receiver’s various connections and features to suit the
specific needs of your home theater
. It lives up to its
flagship status with a family of plug and play card options,
upgradeable software, and P
C configuration program.
This truly is a home theater receiver for the next generation.
Ease of Use
Integra has always been recognized for building products
that are easy-to-use and integrate flawlessly into home
control systems. The DTR-10.5 is no exception. Therefore
while it contains the latest technologies and features, a host
of control options allow for seamless operation through
touchpanels, keypads, and other user interfaces. The end
result is a power
ful, advanced home theater system that
remains simple to enjoy.
DTR-10.5
Designed
to intergra
te. Built to stimulate.
CARD-BASED THX Ultra 2 A/V Receiver
“
UNIQUE” – BEING WITHOUT A LIKE OR EQUAL.
THE DTR-10.5’S CUTTING EDGE TECHNOLOGY,
CARD-BASED ARCHITECTURE, AND UPGRADEABLE
HARDWARE & SOFTWARE GIVE YOU A HOME THEATER
CENTERPIECE THAT OUTPERFORMS ALL OTHERS.
3

Integra DTR-10.5 Specifications

Amplifier Specifications

amplifier power output at 6 ohms	200 W per channel
amplifier power output at 8 ohms	150 W per channel
dynamic power output at 3 ohms	2 x 340 W
dynamic power output at 4 ohms	2 x 260 W
dynamic power output at 8 ohms	2 x 175 W
frequency response	5 Hz to 100 kHz
signal-to-noise ratio	110 dB
total harmonic distortion	0.08%
damping factor	60 at 8 ohms

Input and Output Specifications

line input sensitivity and impedance	200 mV, 50 k ohms
multi-channel input sensitivity and impedance	200 mV, 50 k ohms
subwoofer input sensitivity and impedance	36 mV, 50 k ohms
rec out level and impedance	200 mV, 470 ohms
pre out level and impedance	1 V, 470 ohms
zone 2/3 line output level and impedance	100 mV, 470 ohms

Radio Specifications

AM tuning range	530–1, 710 kHz
AM usable sensitivity	30 µV
FM tuning range	87.5–108.0 MHz
FM usable sensitivity, stereo	17.2 dBf, 2.0 µV (75 ohms IHF)

Phono and Tone Control

phono input sensitivity	2.5 mV, 50 k ohms
phono overload	70 mV RMS at 1 kHz, 0.5% THD
RIAA deviation	20 Hz to 20 kHz: ±0.8 dB
phono signal-to-noise ratio	80 dB
bass control	±12 dB at 50 Hz
mid range control	±12 dB at 1, 000 Hz
treble control	±12 dB at 20, 000 Hz

General Specifications

power supply	AC 120 V, 60 Hz
power consumption	13.0 A
dimensions	435 x 175 x 429 mm
weight	32.1 kg