Integra DTR-10.5 Brochure & Specs

Module
Net-Tune Ethernet
C-NET-A
Net-Tune is a revolutionary
new technology that allows
your A/V receiver to plug
into your home’s wired or
wireless network to access
music stored on your PC or
dedicated server, as well as
Internet radio.
B
Module
i.Link
C-iLINK
All audio formats, including
high-resolution multi-channel
D
VD-Audio and SACD, are
sent in digital form from the
source device to the receiver.
This allows bass management
and other processing to be
per
formed digitally in the
receiver.
A
Module
Multi-channel Input
C-MULTI
Features two multi-channel
inputs for connection to
DVD-Audio and SACD
players. Digital bass
management is possible
and may be bypassed for
“pure” listening.
E
Module
HDMI
C-HDMI
High Definition Multimedia
Interface (HDMI) is the latest
in digital transmission and
connectivity. This format
allows high definition video
to be sent in the digital
domain.
L
Module
RCA Component
C- CP NT-RCA
Provides one additional
RCA component input
and output. Passes
high-definition video
without loss or signal
degradation.
J
Module
Multi-channel
& AES/EBU
C-AES
Features one multi-channel
input and one AES/EBU
input. The latter is a high
quality digital format used
in professional equipment
and high-end DVD/CD
transports. Digital bass
management is possible
and may be bypassed for
“pure” listening.
E
OPTIONAL MODULES
or
or
Module
BNC Component
C- CPNT-BNC
Adds one BNC component
input and output. BNC
connectors offer a positive
locking connection and
are commonly found on
plasma displays.
J

Integra DTR-10.5 Specifications

Amplifier Specifications

amplifier power output at 6 ohms	200 W per channel
amplifier power output at 8 ohms	150 W per channel
dynamic power output at 3 ohms	2 x 340 W
dynamic power output at 4 ohms	2 x 260 W
dynamic power output at 8 ohms	2 x 175 W
frequency response	5 Hz to 100 kHz
signal-to-noise ratio	110 dB
total harmonic distortion	0.08%
damping factor	60 at 8 ohms

Input and Output Specifications

line input sensitivity and impedance	200 mV, 50 k ohms
multi-channel input sensitivity and impedance	200 mV, 50 k ohms
subwoofer input sensitivity and impedance	36 mV, 50 k ohms
rec out level and impedance	200 mV, 470 ohms
pre out level and impedance	1 V, 470 ohms
zone 2/3 line output level and impedance	100 mV, 470 ohms

Radio Specifications

AM tuning range	530–1, 710 kHz
AM usable sensitivity	30 µV
FM tuning range	87.5–108.0 MHz
FM usable sensitivity, stereo	17.2 dBf, 2.0 µV (75 ohms IHF)

Phono and Tone Control

phono input sensitivity	2.5 mV, 50 k ohms
phono overload	70 mV RMS at 1 kHz, 0.5% THD
RIAA deviation	20 Hz to 20 kHz: ±0.8 dB
phono signal-to-noise ratio	80 dB
bass control	±12 dB at 50 Hz
mid range control	±12 dB at 1, 000 Hz
treble control	±12 dB at 20, 000 Hz

General Specifications

power supply	AC 120 V, 60 Hz
power consumption	13.0 A
dimensions	435 x 175 x 429 mm
weight	32.1 kg