Integra DTR-50.6 - Page 44

Advanced Settings
44
Setting Item Default Value Setting Details
CBL/SAT Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
STB/DVR Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
Setting Item Default Value Setting Details
GAME Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
PC Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone 2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone 2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone 3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone 3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone 2/Zone 3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback