Integra Luxtec MLX - Replacement Parts and Accessories; Maintenance and Cleaning

10
M L X 3 0 0 W A T T X E N O N L I G H T S O U R C E
REPLACEMENT PARTS AND ACCESSORIES
MAINTENANCE AND CLEANING
To place an order, contact your local Luxtec distributor or call Luxtec Customer Service at 1-800-325-8966
(USA & Canada only) or +1-508-835-9700 to identify your local Luxtec representative.
Light Source
00MLX 300 Watt Xenon Light Source with Turret (ACMI, Wolf, Storz and Olympus)
Accessories
001320LX Xenon Lamp Module
600987 Fuse 6.3 Amp, Slow Blow
850469 Operating and Service Manual MLX light source
Optional Accessories
AX2100BIF UltraLite® Pro headlight with 9ft (275cm) premium bifurcated cable.
Mark II module and gown clips.
AX2100BIFSL UltraLite® Pro headlight with 9ft (275cm) premium bifurcated cable,
Mark II module and gown clips with short linkage.
001337 MLX Floorstand
•Allowunittocoolforatleast15minutespriortocleaning.
Unplug the power cord before cleaning. The light source exterior can be cleaned and disinfected using 70%
isopropyl alcohol. Allow 5 minutes for alcohol to evaporate before reconnecting to power.
Use a vacuum cleaner and a soft brush to remove visible dust accumulation from fan and vent holes whenever
necessary and always when replacing the lamp.