To Next PageTo Next Page
Need help?Do you have a question about the Intel BLKD945GTPL and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket Type | LGA 775 |
| Chipset | Intel 945G |
| Memory Type | DDR2 |
| Maximum Memory | 4 GB |
| Onboard Graphics | Intel GMA 950 |
| Video Outputs | VGA |
| RAID Support | No |
| Supported Processors | Intel Core 2 Duo, Intel Pentium D, Intel Pentium 4 |
| Expansion Slots | 1 x PCI Express x16, 2 x PCI |
| Storage Interfaces | 4 x SATA 3Gb/s |
| USB Ports | 8 (4 rear, 4 internal) |
| Memory Slots | 4 x DIMM |
Defines the target readers for the technical product specification document.
Outlines the chapters and their content within the document.
Explains the symbols and abbreviations used throughout the specification.
Details the meaning and usage of different types of callout messages.
Provides an overview of the technical reference chapter and its contents.
Details memory maps, addressable memory, and memory configurations.
Lists the Direct Memory Access (DMA) channels and their system resources.
Defines the Input/Output addresses assigned to various hardware components.
Maps the configuration space for Peripheral Component Interconnect (PCI) devices.
Describes the interrupt request (IRQ) assignments for system devices.
Illustrates how PCI interrupts are routed through the system.
Details the various connectors available on the motherboard.
Explains the function and settings of the jumper block.
Covers physical aspects like form factor and I/O shield dimensions.
Discusses power supply and DC loading requirements.
Addresses heat management and component temperature limits.
Provides information on Mean Time Between Failures (MTBF).
Lists environmental specifications like operating temperature and shock resistance.
Outlines safety and electromagnetic compatibility compliance.
Provides a general overview of the Intel Desktop Board D945GTP.
Lists Intel website resources for product information and support.
Details processor support, socket type, and compatible bus speeds.
Covers memory types, capacities, and configurations supported by the board.
Explains the components and functions of the Intel 945G chipset.
Describes the PCI Express x16 and x1 connectors and their capabilities.
Details the optional IEEE-1394a ports for connecting peripherals.
Covers legacy interfaces like serial, parallel, and diskette drives.
Describes the onboard audio capabilities, codecs, and connectors.
Details the network interface, including Gigabit and 10/100 Ethernet.
Explains features like fan control, thermal monitoring, and chassis intrusion.
Discusses ACPI, system states, and wake-up capabilities.
Describes the optional TPM for enhanced platform security.
Introduces the BIOS features and the board's BIOS implementation.
Details the structure and capacity of the BIOS flash memory device.
Explains how the BIOS configures system resources like PCI devices.
Describes the SMBIOS data structure for system management.
Explains how USB devices are supported during boot and OS installation.
Covers methods and utilities for updating the system BIOS.
Details the various boot device selections and priorities.
Provides techniques to optimize system boot and POST execution time.
Explains password protection for BIOS setup and boot access.
Describes the function of the onboard speaker for audible error codes during POST.
Lists beep code patterns and their corresponding error types.
Provides a list of common BIOS error messages and their explanations.
Explains diagnostic progress codes generated during POST.
