Intel BLKDQ45CB User Manual

Installing and Replacing Desktop Board Components
35
5. Remove the processor from the protective processor cover. Hold the processor
only at the edges, being careful not to touch the bottom of the processor (see
Figure 10). Do not discard the
protective processor cover.
Always replace the
processor cover if the processor is removed from the socket.
Figure 10. Remove the Processor from the Protective Processor Cover
6. Hold the processor with your thumb and index fingers oriented as shown in
Figure 11. Make sure your fingers align to the socket cutouts (Figure 11, A). Align
notches (Figure 11, B)
with the socket (Figure 11, C). Lower the processor straight
down w
ithout tilting or sliding it in the socket.
Figure 11. Install the Processor

Intel BLKDQ45CB Specifications

General

Brand	Intel
Model	BLKDQ45CB
Category	Motherboard
Language	English