Intel Desktop Board D101GGC Product Guide
26
Installing and Removing the Desktop Board
CAUTION
Only qualified technical personnel should do this procedure. Disconnect the computer from its
power source before performing the procedures described here. Failure to disconnect the power
before you open the computer can result in personal injury or equipment damage.
Refer to your chassis manual for instructions on installing and removing the desktop board.
Figure 5 shows the location of the mounting screw holes for desktop board D101GGC.
OM18211
Figure 5. Desktop Board D101GGC Mounting Screw Hole Locations
To Next Page
Loading...
Need help?
General
