EasyManuals Logo
Home>Intel>Motherboard>D850GB

Intel D850GB User Manual

Intel D850GB
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Product Description
37
1.12.2 Hardware Support
CAUTION
If the Wake on LAN and Instantly Available technology features are used, ensure that the power
supply provides adequate +5 V standby current. Failure to do so can damage the power supply.
The total amount of standby current required depends on the wake devices supported and
manufacturing options. Refer to Section 2.11.3 on page 74 for additional information.
The D850GB board provides several power management hardware features, including:
Power connector
Fan connectors
Wake on LAN technology
Instantly Available technology
Resume on Ring
Wake from USB
Wake from PS/2 keyboard
PME# wakeup support
Wake on LAN technology and Instantly Available technology require power from the +5 V
standby line. The sections discussing these features describe the incremental standby power
requirements for each.
Resume on Ring enables telephony devices to access the computer when it is in a power-managed
state. The method used depends on the type of telephony device (external or internal) and the
power management mode being used (APM or ACPI).
NOTE
The use of Resume on Ring and Wake from USB technologies from an ACPI state requires an
operating system that provides full ACPI support.
1.12.2.1 Power Connector
When used with an ATX12V-compliant power supply that supports remote power on/off, the
D850GB board can turn off the system power through software control. To enable soft-off control
in software, advanced power management must be enabled in the BIOS Setup program and in the
operating system. When the system BIOS receives the correct APM command from the operating
system, the BIOS turns off power to the computer.
With soft-off enabled, if power to the computer is interrupted by a power outage or a disconnected
power cord, when power resumes, the computer returns to the power state it was in before power
was interrupted (on or off). The computer’s response can be set using the After Power Failure
feature in the BIOS Setup program’s Boot menu.

Table of Contents

Other manuals for Intel D850GB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel D850GB and is the answer not in the manual?

Intel D850GB Specifications

General IconGeneral
BrandIntel
ModelD850GB
CategoryMotherboard
LanguageEnglish

Related product manuals