EasyManua.ls Logo

Intel D945PLNM - LAN Subsystem; 10;100 Mbits;Sec LAN Subsystem; LAN Connector LED Locations

Intel D945PLNM
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product Description
31
1.9 LAN Subsystem
The LAN subsystem consists of the following:
Physical layer interface device Intel 82562GX PLC for 10/100 Mbits/sec Ethernet LAN
connectivity.
RJ-45 LAN connector with integrated status LEDs
Additional features of the LAN subsystem include:
CSMA/CD protocol engine
LAN connect interface that supports the 82562GX
PCI Conventional bus power management
Supports ACPI technology
Supports LAN wake capabilities
1.9.1 10/100 Mbits/sec LAN Subsystem
The 10/100 Mbits/sec LAN subsystem includes the ICH6, the Intel 82562GX PLC, and an RJ-45
LAN connector with integrated status LEDs.
1.9.1.1 Intel
®
82562GX Physical Layer Interface Device
The Intel 82562GX provides the following functions:
Basic 10/100 Ethernet LAN connectivity
Full device driver compatibility
Programmable transit threshold
Configuration EEPROM that contains the MAC address
Alert Standard Format (ASF) 1.03 support
1.9.1.2 RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 9).
Green LED
Yellow LED
OM15076
Figure 9. LAN Connector LED Locations

Table of Contents

Other manuals for Intel D945PLNM

Related product manuals