Intel D945PLNM - Mechanical Considerations; Form Factor; Board Dimensions

Technical Reference
57
2.9 Mechanical Considerations
2.9.1 Form Factor
The board is designed to fit into an ATX-form-factor chassis. Figure 17 illustrates the mechanical
form factor of the board. Dimensions are given in inches [millimeters]. The outer dimensions are
9.90 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O
connectors and mounting holes are in compliance with the ATX specification.
OM18291
6.100
[154.94]
3.100
[78.74]
3.150
[80.01]
6.450
[163.83]
6.500
[165.10]
6.200
[157.48]
5.200
[132.08]
2.850
[72.39]
1.800
[45.72]
0.00
2.600
[66.04]
0.00
Figure 17. Board Dimensions