Intel DQ67SW User Manual

Installing and Replacing Desktop Board Components
35
Installing the I/O Shield
The Desktop Board comes with an I/O shield. When installed in the chassis, the shield
blocks radio frequency transmissions, protects internal components from dust and
foreign objects, and promotes correct airflow within the chassis.
Install the I/O shield before installing the Desktop Board in the chassis. Place the
shield inside the chassis as shown in Figure 5. Press the shield into place so that it fits
t
ightly and securely. If the shield does not fit, obtain a properly sized shield from the
chassis supplier.
Figure 5. Installing the I/O Shield

Intel DQ67SW Specifications

General

Form Factor	Micro ATX
Socket	LGA 1155
Memory Type	DDR3
Memory Slots	4
Maximum Memory	32 GB
PCI Express x16	1
PCI Express x1	2
PCI Slots	1
SATA 6Gb/s	2
SATA 3Gb/s	4
RAID Support	RAID 0, 1, 5, 10
Chipset	Intel Q67 Express
USB 2.0 Ports	10
USB 3.0 Ports	2
Ethernet	1 x Gigabit Ethernet
Video Outputs	DisplayPort