Intel Desktop Board DZ77BH-55K Technical Product Specification
26
1.5.4.1 SATA RAID
The board supports the following RAID (Redundant Array of Independent Drives) levels
via the PCH:
• RAID 0 - data striping
• RAID 1 - data mirroring
• RAID 0+1 (or RAID 10) - data striping and mirroring
• RAID 5 – distributed parity
1.5.4.2 Intel
®
Smart Response Technology
Intel
®
Smart Response Technology is a disk caching solution that can provide improved
computer system performance with improved power savings. It allows configuration of a
computer system with the advantage of having HDDs for maximum storage capacity
with system performance at or near SSD performance levels.
For more information on Intel Smart Response Technology, go to
http://www.intel.com/support/chipsets/sb/CS-032826.htm
NOTE
In order to use supported RAID and Intel Smart Response Technology features, you
must first enable RAID in the BIOS. Also, during Microsoft Windows XP installation, you
must press F6 to install the RAID drivers. See your Microsoft Windows XP
documentation for more information about installing drivers during installation. Both
Microsoft Windows 7 includes the necessary RAID drivers for both AHCI and RAID
without the need to install separate RAID drivers using the F6 switch in the operating
system installation process.
To Next Page
Loading...
