Intel ETHEREXPRESS PRO/100 - Prodigy Internet Setup

Utilities and Applications 5-19
All. Windows disks #7 and 8 are required to complete the
installation
d In the Remote Access Configuration screen,
 Click the COM port assigned to the Intel modem
 Under Device, select Intel EtherExpress PRO/100.
 Click OK to save changes, then Click Restart Computer
9 Restart RAST to input the phone number(s) into RAS
a Click Edit to access the Edit Phone Book Entry screen.
b Input all other required data
c Under Port: select Any modem port,
d Click OK to save and exit
Prodigy Internet version 1.1.6 with Windows 95
To set up the Intel modem or modify the present configuration:
1 Double-click NetAssist for Prodigy Internet.
2 Click Dialer Settings.
3 Click Modem Info. Highlight the EtherExpress PRO/100
LAN+Modem.
4 By default, there should be an X in the Check this if you have a
PCMCIA modem.
5 Click Change Modem Strings.
6 Modify the Init String: line to read AT&FE0Q0V0, then click OK.
7 Click OK to exit the Modem Settings menu.
8 Click Exit to accept changes and close the NetAssist Windows
Application - NetAssist.
9 Double-click the Prodigy Internet icon to access the service.