6-32 PRO/100 LAN+Modem PC Card User’s Guide
S91 Line Transmit Level
This register is effective only for Japan. It specifies the line transmit
level, in dB, with an implied minus sign. Default is 15 dB, range is 6
- 15.
S92 Direct Connect Transmit Level
This register sets the transmit level, in dBm, for direct connect
cellular. This value may have different settings for different phones.
Default is 0 dBm.
S95 Negotiation Message Options
This register enables various result codes indicating the sequence of
events in an error-controlled connection. This S-Register does not
affect the way the connection is negotiated, it just enables extended
messages.
S95=0 Disables extended result code messages.
S95=1 Use DCE (modem-to-modem) speed when reporting
CONNECT result codes.
S95=2 Append /ARQ to CONNECT result code when an
error-controlled (EC) connection is established.
S95=4 Enable CARRIER result codes.
S95=8 Enable PROTOCOL result codes.
S95=32 Enable COMPRESSION result codes.
S98 Cable Detection Options
This register controls the automatic detection and reporting of
changes in the cable or minidock attached to the modem.
S98=0 Disables cable detection and reporting.
S98=1 Enable cable detection; disable reporting.
S98=2 Enable cable detection and reporting.
To Next Page
Loading...
Need help?
General
