Windows 3.x/MS-DOS Installation 4-27
SunSoft PC-NFS (version 3.5)
NDIS 2.0 Driver
1 Run the Intel Installation Program from the Installation Disk.
2 Choose SunSoft PC-NFS from the Select Network Operating
System screen.
3 Follow the prompts to complete the Intel installation.
4 Install PC-NFS for Ethernet according to instructions in the PC-
NFS documentation. Choose NDIS setup, and follow the
instructions to complete the setup. Note the prompt that tells you
that further manual modifications will have to be made.
5 Reboot the computer. You will see some error messages. Disregard
them and continue with these instructions.
6 Rename the file PROTOCOL.NFS in the C:\LANMAN directory
to PROTOCOL.INI. Use an text editor to edit the
PROTOCOL.INI file as follows:
Replace the items
[YOUR-MAC-MODULE]
DRIVERNAME = YOURMAC$
OPTION1 = VALUE1 ETC.
[NFS-NDIS]
DRIVERNAME = NFSLINK1
BINDINGS = YOUR-MAC-MODULE
with
[INTELNET]
DRIVERNAME = INTEL$
[NFS-NDIS]
DRIVERNAME = NFSLINK$
BINDINGS = INTELNET
7 Copy M16BNDIS.EXE from the C:\INTEL\M16B directory to
the C:\LANMAN directory.
8 Use a text editor to insert the following lines in your CONFIG.SYS
file:
To Next Page
Loading...
Need help?
General
