Windows 3.x/MS-DOS Installation 4-31
from the Intel Network Drivers Disk to the PATHWAY directory
on your hard disk or boot disk. (The files are LSL.COM,
M16BODI.COM, IPXODI.COM, VLM.EXE, and NET.CFG.)
6 Change to the PATHWAY directory and load the software in the
following order:
LSL
M16BODI
IPXODI (ONLY IF USING NOVELL NETWARE)
VLM (ONLY IF USING NOVELL NETWARE)
7 Load the Wollongong file ODI.EXE.
8 Continue with the instructions in the PathWay Access for DOS
manual.
9 Reboot the PC.Windows 3.x
Windows 3.x Modem Configuration Notes
The PRO/100 PC Card doubles as a LAN card and fax/modem. As a
modem, the PRO/100 PC Card features Hayes and Microcom compatibil-
ity and the latest in data transmission, data compression, and error control
techniques. It can be used with most standard communications and fax
software packages.
Note
Unless Card and Socket Services are being used under Windows
3.x, the PRO/100 PC Card requires that a LAN+modem driver
(M16BODI.COM, M16BNDIS.EXE, or M16BPD.COM) or a
modem-only driver (IMENABLE.COM) be loaded before the
modem can be used.
For more detailed modem information, see Chapter 6. Modem Reference
in this Users Guide.
To Next Page
Loading...
Need help?
General
