Intel Express 10 User Manual

32
CHAPTER 3 Intel Express 10/100 Fast Ethernet Switch
Console Command-line Summary
Console Commands
help-kbd
Lists the help and shortcut keys.
banner
Displays the Console Manager logo.
clear
Clears the screen.
login
Exits Console Manager and displays the login screen.
logout
Exits Console Manager and any active Telnet session.
set-prompt <new_prompt>
Changes the console prompt.
set-passwd
Changes the console password.
System Commands
sys-stat
Displays system status.
get-stst-level
Displays the selftest level.
set-stst-level {none|short|long}
Changes the selftest level.
warm-reset
Performs a warm reset of the switch.
cold-reset
Performs a cold reset of the switch, which is the same as powering it off then on again.
get-last-err
Displays information about the last fatal error.
init-nvram
Resets nonvolatile RAM (NVRAM) to default values.
set-line-slip {9600|19200|38400}
Transfers the serial connection to SLIP mode and sets the baud.
get-sw-file
Displays the SNMP agent software filename.

Intel Express 10 Specifications

General

Brand	Intel
Model	Express 10
Category	Network Router
Language	English