Intel Express 10 User Manual

67
Console Command Reference CHAPTER 3
get-eth-cnt
get-eth-cnt <port-number>
Displays the Ethernet Statistics Counters for port port-number. This is
almost identical to the Ethernet-like Statistics Group of the Ethernet
MIB.
SYS_console> get-eth-cnt 1
Ethernet Statistics for port 1
=================================
Transmit OK : 2817886
Underflow Errors: 0
Exces Coll Errors: 0
Exces Fctrl Errors: 0
Receive EOF : 2896502
Receive OK : 2896498
Overflow Errors: 0
CRC Errors: 0
Alignment Errors: 0
Runt Errors: 4
Lost/Fctrl Errors: 0
Too Long Errors: 0
=================================
get-colls-cnt
get-colls-cnt <port-number>
Displays the Ethernet collision statistics for each port. This is nearly
identical to the Ethernet-like collisions statistics group of the Ethernet
MIB and displays the collision count distribution for this port. If a
packet still collides on the 16th count, the packet is dropped.
SYS_console> get-colls-cnt 1
Ethernet Collision Distribution for port 1
==================================================
0 collison count : 2819392
1 collison count : 10
2 collison count : 13
3 collison count : 4
4 collison count : 3
5 collison count : 2
6 collison count : 0
7 collison count : 2
8 collison count : 2
9 collison count : 0
10 collison count : 0
11 collison count : 0
12 collison count : 0
13 collison count : 0
14 collison count : 0
15 collison count : 0
16 collison count : 0
==================================================
NOTE
Collisions on the first few
counts are normal. However,
if collisions occur past the
10th count, you should
reconfigure your network so
devices that mostly talk to
each other are on the same
segment.

Intel Express 10 Specifications

General

Brand	Intel
Model	Express 10
Category	Network Router
Language	English