4
The wake-up packet structure and behavior is defined in a WOL information
brief, available on the Web at:
http://www.us.pc.ibm.com/infobrf/iblan.html
See the section Troubleshooting and FAQs later in this guide for general trouble-
shooting and a listing of common problems and solutions for Wake on LAN
operability.
Making a Setup Floppy Disk
If you need to use a floppy disk to install the PRO/100+ adapter drivers use
MAKEMS.BAT (for Microsoft operating systems) or MAKENW.BAT (for Net-
Ware), located in the \MAKEDISK directory on the CD. The format for the
command is:
D:\MAKEDISK\MAKEMS.BAT D: A:
In the example above, D: is your CD-ROM drive and A: is your floppy drive.
Configure the Adapter and Install the Drivers
Novell NetWare 5.0 Only
Use the NetWare* Install program to install the PRO/100+ adapter driver in
Novell NetWare 5.0. For Novell NetWare 4.1x, see the section Novell NetWare
4.x Only. For 3.11 and 3.12, see the readme files. For DOS ODI, see the section
DOS and Windows 3.1 Setup for Novell NetWare DOS ODI Clients. The follow-
ing procedure is a condensed description of the installation process.
1 From the NetWare console, type LOAD NWCONFIG and press Enter.
2 From the Configuration Options screen, choose “Driver options” and press
Enter.
3 Choose “Configure network drivers” and press Enter. If any drivers are
already loaded, a list of them appears.
4 Choose “Select an additional driver” and press Enter. A list of drivers
appears.
5 Insert the Intel floppy disk or CD and press the Insert key to install an
unlisted driver.
6 Specify the correct path to your media if necessary by pressing F3. Press
Enter to search the floppy or CD-ROM drive.
7 Highlight the Intel(R) PRO PCI Adapter and press Enter to select it.
8 The next screens ask for frame and protocol types. Use the arrow keys to
select specific items or choose the defaults. Select “Save parameters and
load driver” to continue.
P100se~2.fm Page 4 Tuesday, January 5, 1999 10:03 AM
To Next Page
Loading...
