Intel S1200BTLRM Specification

Functional Architecture Intel® Server Board S1200BT TPS
Revision 1.0
Intel order number G13326-003
24
 USB Specification-compliant keyboards.
 USB Specification-compliant mouse.
 USB Specification-compliant storage devices that utilize bulk-only transport mechanism.
USB devices are scanned to determine if they are required for booting.
The BIOS supports USB 2.0 mode of operation, and as such supports USB 1.1 and USB 2.0
compliant devices and host controllers.
During the pre-boot phase, the BIOS automatically supports the hot addition and hot removal of
USB devices and a short beep is emitted to indicate such an action. For example, if a USB
device is hot plugged, the BIOS detects the device insertion, initializes the device, and makes it
available to the user. During POST, when the USB controller is initialized, it emits a short beep
for each USB device in the system as if they were all just ―hot added‖.
Only on-board USB controllers are initialized by BIOS. This does not prevent the operating
system from supporting any available USB controllers including add-in cards.
3.4.5.2 Legacy USB Support
The BIOS supports PS/2 emulation of USB keyboards and mouse. During POST, the BIOS
initializes and configures the root hub ports and searches for a keyboard and/or a mouse on the
USB hub and then enables the devices that are recognized.
3.5 Optional Intel
®
SAS RAID Module
The Intel
®
Server Board S1200BTL provides a SAS Mezzanine slot (J2H1) for the installation of
an optional Intel
®
SAS RAID Module. Once the optional Intel
®
SAS Entry RAID Module is
detected, the x4 PCI Express* links from the chipset to the SAS Mezzanine slot. Four modules
are supported in this platform: AXXRMS2AF040, AXXRMS2LL040 and AXX4SASMOD.
3.6 Integrated Baseboard Management Controller
The Intel
®
Server Board S1200BTL has the highly integrated single-chip baseboard
management controller based on ServerEngines* Pilot III, but Intel
®
Server Board S1200BTS
does not have the integrated baseboard management control.
This Intel
®
Integrated BMC contains the following integrated subsystems and features.
The following is a summary of the BMC management hardware features used by the BMC:
 400MHz 32-bit ARM9 processor with memory management unit (MMU)
 Two independent10/100/1000 Ethernet Controllers with RMII (Reduced Media
Independent Interface)/RGMII(Reduced Gigabit Media-Independent Interface)
support
 DDR2/3 16-bit interface with up to 800 MHz operation
 12 10-bit Analog to Digital Converters
 Sixteen fan tachometers
 Eight Pulse Width Modulators (PWM)
 Chassis intrusion logic

Intel S1200BTLRM Specifications

General

Brand	Intel
Model	S1200BTLRM
Category	Server Board
Language	English