Intel® Server Board SE7520JR2 Miscellaneous Board Information
Revision 1.0
C78844-002
219
• Recovery from multiple floppy disks.
o Prepare 2 blank disks.
o The first disk(disk0) must be made bootable
o Copy amiboot.000 to disk0, and amiboot.001 to disk1.
• Execute BIOS Recovery
o set Recovery Boot Jumper by moving jumper J1H2 row B from Pins 1-2 to Pins
2-3
o Insert the recovery media to the appropriate drive or USB interface.
o Power on system
o The System will automatically boot to the media and start the BIOS recovery
operation.
o During multi-disk recovery operation, system will beep (1sec) continuously
o to notify user to insert disk1
o When the update has completed, the system will beep 4 times, followed by an
endless beep.
o Turn off the system and unplug it.
o set jumper J1H2 back to Normal mode J1H2 B(1-2).
• Recovery operation complete.
To Next Page
Loading...
