Intel SSR212MA Install Guide

Disk on Module (DOM) Install Guide: Intel® Storage System SSR212MA 1
Disk on Module (DOM) Install Guide
The Intel® Storage System SSR212MA ships with a single 512-MB Disk on Module
(DOM) installed directly to the server board’s IDE connector. The DOM is a storage
device based on flash memory technology, which emulates an ordinary magnetic hard disk
drive.
Tools Needed
• Flat-head screwdriver
Kit Contents
DOM Installation Instructions
Prepare System
1. Read all caution and safety statements listed in this document before performing any
of the steps. See the Intel® Server Boards and Server Chassis Safety Information
document at http://support.intel.com/support/motherboards/server/sb/cs-010770.htm
for a complete listing of all caution and safety statements.
Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the Intel® Storage System Software User Manual for shutting down the
system and deactivating the DOM.
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the DOM from its protective packaging.
DOM Kit (FXSDOM)
Item Quantity
Disk on Module (DOM) 1
Disk on Module Install Guide 1

Intel SSR212MA Specifications

General

Brand	Intel
Model	SSR212MA
Category	Storage
Language	English