Intellian FB500 - Page 20

FB250/500 User Manual
20
Installation and Mounting of Antenna
The method of installation and mounting of antenna may vary due to vessel de-
sign but the following procedures are applicable in most situations, and will result
in a secure and effective installation.
Conrmation of Size Prior to Installation
• Check the height and diameter of the bottom surface of the antenna before
installing.
• The space must be sufcient for installing the antenna unit considering the
height and diameter of the antenna.
• The height and the diameter of the bottom surface of the antenna are
as shown in the following drawing. If possible, install the antenna using a power
tower.
43cm (16.9”)
44 cm (17.3”)
70 cm (27.5”)
72 cm (28.3”)
ø33.1cm(13”)
ø30.5cm(12”)
Ø37 cm (14.7”)
38.1 cm (15”)
Ø43cm(16.9”)
Ø44cm(17.3”)
Ø50 cm (19.7”)
54 cm (21.2”)
Radome Dimension of
FB250 Standard
Radome Dimension of FB250
with Intellian i2 matching dome
Radome Dimension of FB250
with Intellian i3 matching dome
Radome Dimension of
FB500 Standard
Radome Dimension of FB250 with
Intellian i4 matching dome