Intellian FB500 - Page 21

21
Mark of the Antenna Mounting Position
Referring to the mounting template, mark where antenna will be mounted on
board (it must be a at surface) or on a separate power tower
Note: If a power tower is not suitable to mount the antenna, separate cable shock and
waterproong measures must be taken to protect the RF connector from being exposed
to the sea water and external shocks. An exposed cable may cause electric shock and
cause serious damage to the equipment.
Mounting Position of FB250 Standard and
FB250 with Intellian i2 Matching Dome
Mounting Position of
FB500 Standard
Mounting Position of FB250 with
Intellian i4 Matching Dome
144.25
144.25
228.60
228.60
23.3cm ( 9.2”)
14.15cm (5.6”)
303.7
303.7
Mounting Position of FB250 with
Intellian i3 Matching Dome
141.5
233