Intellian FB500 - Page 43

43
Primary Handset Operations
Making a Voice Call
Before making a voice call, please make sure that:
- The Primary Handset is connected to the BDU.
( Status indicator should be on.)
- The Primary Handset is NOT radio silent. ( Status indicator should be off.)
- The BDU has successfully registered with the network and ready for CS do-
main (voice) services. ( Status indicator should be on.)
You can use the following two options for making a call:
• Manual Dial:
1. Using the alphanumeric keypad, dial 00 <country code>
<phone number>.
2. Press Call/Answer key*.
• Using Contacts or Call Log list from the Primary Handset:
- Enter the Contacts list of the Primary Handset; scroll to the desired
number and press Call/Answer key*, or
- Enter the Log list of the Primary Handset; scroll to the desired number
and press Call/Answer key*.
Note: For voice calls and SMS, you may also use ‘+’ by pressing and holding the key
instead of “00” at the beginning of dialled number string as an alternative ( + <country
code> <phone number>).
To End a Call
1. Press Call/Menu End key*
Receiving a call
When there is an incoming call, the Primary Handset will,
• Ring.
• The calling party’s number will be displayed on the screen.
If the number is stored in the contacts, the corresponding name of
contact will be displayed.
To answer an incoming call, press the Call/Answer key*
OK
OK
*
+
MODE
C
# 中
7
1
2
5
6
9
3
8
0
4
ghl’
jkl
mno
abc
def
pqrs
tuv
wxyz
*
+
# 中
OK
OK
*
+
MODE
C
# 中
7
1
2
5
6
9
3
8
0
4
ghl’
jkl
mno
abc
def
pqrs
tuv
wxyz
*
+
# 中
OK
OK
*
+
MODE
C
# 中
7
1
2
5
6
9
3
8
0
4
ghl’
jkl
mno
abc
def
pqrs
tuv
wxyz
*
+
# 中