DMX 512 CONTROLLER SERIES
Action :Action :
2) Press the button repeatedly until the
LED turns on.
AUTO DEL
AUTO
1)
Use buttons to change
banks if necessary.
BANK UP/DOWN Program
3) Adjust the speed via the fader
and the loop rate via the fader.
PROGRAM SPEED
FADE TIME
Notes :Notes :
Deselect Blackout if LED is lit.
3.3.3 RUNNING A PROGRAM3.3.3 RUNNING A PROGRAM
Action :Action :
2) Use buttons to change
banks if necessary.
BANK UP/DOWN Program
1 PROGRAM) Press and hold the button until the
LED blinks.
3) Select the desired fixture via the button.SCANNERS
Notes :Notes :
Deselect Blackout if LED is lit.
4) Adjust and change fixture attributes using the channel
faders and wheel.
6)
Select the desired button to save.SCENES
4) Alternatively you can tap the button
twice. The time between two taps sets the time
between SCENES (up to 10 minutes).
TAP DISPLAY
Also called a Tap-Sync.
3.3.4 CHECK PROGRAM3.3.4 CHECK PROGRAM
Action :Action :
2) Use the buttons to select
the bank to review.
BANK UP/DOWN
PROGRAM
1)
Press and hold the button until the
LED blinks.
PROGRAM
3) Press the buttons to review each
scene individually.
SCENES
Notes :Notes :
3.3.5 EDITING A PROGRAM3.3.5 EDITING A PROGRAM
S
cenes will need to be modified manually.
5)
Press the button to prepare the save.MIDI/REC
Action :Action :
2) Use buttons to select the
bank you will copy.
BANK UP/DOWN
PROGRAM
1 PROGRAM) Press and hold the button until the
LED blinks.
3) Press the button to prepare the copy.MIDI/REC
Notes :Notes :
All 8 scenes in a Program bank will be copied.
4) Use buttons to select the
destination bank.
BANK UP/DOWN
PROGRAM
3.3.6 COPY A PROGRAM3.3.6 COPY A PROGRAM
5)
Press the button to execute
the copy. All LEDs on the controller will blink.
MUSIC BANK COPY
DMX-240A USER MANUAL
12/20
To Next Page
Loading...
Need help?
Power
Operating Environment
Ports & interfaces
Weight and Dimensions