Intelligent Weighing Technology Intell-Count IDC 3 User Manual

- 17-
P Cont
Sets the RS-232 interface to
print continuously and the
accumulation function is
disabled.
SEr r E
Sets the RS-232 to print
continuously the weight
only.(for remote display)
P bAU d
b 600
b 1200
b 2400
b 4800
b 9600
Sets the required baud rate
(speed for the RS- 232
communications).
Default rate is 4800.
PAritY
8 n 1
7 E 1
7 o 1
8 data bits, no parity
7 data bits, even parity
7 data bits, odd parity
ptype
tpup
lp50
Tpup:TSCALE Tpup printer
Lp50: TSCALE lp-50 printer
U id
“U id”
“ Abc234”
“ “
Shows the current user ID (if any).
Enter a new User ID as described in the description
under the PLU section. The ID can be alphanumeric,
but is limited to 6 characters.
SC id
“Sc id”
“ Abc234”
“ “
Shows the current scale ID (if any).
Enter a new Scale ID as described in the Description
under the PLU section. The ID can be alpha-numeric
but is limited to 6 characters.
tECH
Allows access to the Technical parameters using a
password. Not normally accessed by user.

Intelligent Weighing Technology Intell-Count IDC 3 Specifications

General

Brand	Intelligent Weighing Technology
Model	Intell-Count IDC 3
Category	Scales
Language	English