Intellinet 501903 User Manual

Wireless LAN Access Point Configuration
22
Set Security
“Set Security” let you setup the wireless security for the data transmission between
the bridged access points in “AP Bridge-Point to Point mode”, “AP Bridge-Point to
Multi-Point mode” or “AP Bridge-WDS mode”. It provides “WEP 64bits”, “WEP
128bits”, “WPA (TKIP)”, “WPA2 (AES)” encryption methods.
Parameter Description
Encryption
You can select “No encryption”,“ WEP 64bits”, “WEP 128bits”, “WPA
(TKIP)” or “WPA2 (AES)” encryption methods.
Key Format
This is only used when you select “ WEP 64bits” or “WEP 128bits”
encryption method. You may select to select ASCII Characters
(alphanumeric format) or Hexadecimal Digits (in the “A-F”, “a-f” and “0-9”
range) to be the WEP Key. For example:
ASCII Characters: guest
Hexadecimal Digits: 12345abcde

Intellinet 501903 Specifications

General

Brand	Intellinet
Model	501903
Category	Wireless Access Point
Language	English