Intellinet 501903 User Manual

Wireless LAN Access Point Configuration
23
WEP Key
This is only used when you select “ WEP 64bits” or “WEP 128bits”
encryption method. The WEP key is used to encrypt data transmitted
between the bridged access points. Fill the text box by following the rules
below.
64-bit WEP: input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range)
or 5-digit ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the “A-F”, “a-f” and “0-9”
range) or 10-digit ASCII characters as the encryption keys.
Pre-shared Key Format
You may select to select Passphrase (alphanumeric format) or
Hexadecimal Digits (in the “A-F”, “a-f” and “0-9” range) to be the Pre-
shared Key. For example:
Passphrase: iamguest
Hexadecimal Digits: 12345abcde
Pre-shared Key The Pre-shared key is used to authenticate and encrypt data transmitted
between the bridged access points. Fill the text box by following the rules
below. Hex WEP: input 64-digit Hex values (in the “A-F”, “a-f” and “0-9”
range) or at least 8 character pass phrase as the pre-shared keys.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
Active Wireless Client Table
“Active Wireless Client Table” records the status of all active wireless stations that
are connecting to the access point. You can lookup the MAC Address, Number of
Transmitted Packets, Number of Received Packets and Encryption Status of each
active wireless client in this table.

Intellinet 501903 Specifications

General

Brand	Intellinet
Model	501903
Category	Wireless Access Point
Language	English