Wireless LAN Access Point Configuration
45
3.2.8 Firmware Upgrade
This page allows you to upgrade the Access Point’s firmware.
Parameter Description
Firmware Upgrade
This tool allows you to upgrade the Access Point’s system firmware. To
upgrade the firmware of your Access Point, you need to download the
firmware file to your local hard disk, and enter that file name and path in
the appropriate field on this page. You can also use the Browse button to
find the firmware file on your PC. Please reset the Access Point when the
upgrade process is complete.
Once you’ve selected the new firmware file, click Apply button at the bottom of the screen to start the upgrade
process. (You may have to wait a few minutes for the upgrade to complete). Once the upgrade is complete you
can start using the Access Point.
To Next Page
Loading...
Need help?
General
