Wireless LAN Access Point Configuration
33
For the WEP settings, please refer to section “WEP only”. For the 802.1x settings,
please refer to section “802.1x only”.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
WPA pre-shared key
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-
shared key to authenticate wireless stations and encrypt data during communication.
It uses TKIP or CCMP(AES) to change the encryption key frequently. So the
encryption key is not easy to be broken by hackers. This can improve security very
much. You can use WPA pre-shared key encryption in “AP mode”, “Station-Ad Hoc
mode”, “Station-Infrastructure mode”, “AP Bridge-WDS mode” and “Universal
Repeater mode”.
To Next Page
Loading...
Need help?
General
