13
CONfIGURATION
Available Prole(s): This list shows the preferred networks for the wireless
connection. You can add, remove, edit and duplicate the preferred networks,
and you can also set one of the networks as the default connection.
Add/Remove/Edit: Click with a prole selected to make desired changes.
Duplicate: Click to create a new prole with the same settings as the current one.
Set Default: Click to designate a selected prole on the Available Prole(s) list as
the default network.
CONFIGURING A PROFILE
Clicking “Add” or “Edit” on the Prole screen will display a Wireless Network
Properties screen that allows you to set various parameters required to be in
synch with devices you connect to wirelessly.
Prole Name: Enter an easily recognizable name to quickly differentiate among
multiple networks.
Network Name (SSID): The SSID (up to 32 printable ASCII characters) is the
unique name identied in a WLAN. The ID prevents the unintentional merging
of two co-located WLANs. If you specify an SSID for the adapter, then only the
device with the same SSID can connect to the adapter.
This is a computer-to-computer (ad hoc) network; wireless access points
are not used.: When this option is selected, the adapter will operate in Ad Hoc
To Next Page
Loading...
Need help?
General
