12
CONfIGURATION
Link Quality and Network Address — are self-explanatory. The other references on
this screen reect the settings congured on the Prole screen.
Type: This displays either “Infrastructure” (operating in conjunction with an access
point) or “Ad Hoc” (operating without an access point) based on the selection
made on the Prole screen.
Encryption: This displays the encryption setting of the current connection —
“None,” “WEP,” “TKIP” or “AES” — based on the selection made on the Prole
screen.
SSID: The Service Set ID (up to 32 printable ASCII characters) is the unique name
identied in a WLAN that prevents the unintentional merging of two co-located
wireless networks. This can be entered on the Prole screen.
Renew IP: Click to renew the IP address of the adapter.
2.2 Prole
This screen helps you manage the networks you connect to frequently. By creating
and using proles, you can avoid the need to re-establish settings each time you
make a connection.
INTELLINET NETWORK SOLUTIONS Utililty
INTELLINET NETWORK SOL